SENSOREX In-Line Mounted pH Elec

SENSOREX In-Line Mounted pH Electrodes

In-Line mountings are ideal for replacing existing brands of threaded electrodes. They are used in piping systems where the flow can be shut off for electrode maintenance. In turbulent flow, they will perform as self cleaning electrodes.

A simple, reusable gland is used to mount the electrode. Electrodes, glands, and flow cells are available to fit 3/4", 1", and 2" lines.

To order an In-Line mounted combination pH/Reference electrode with a Double Reference Junction, select the electrode, flow cell, and cable assembly you need. These parts are available only in CPVC material. Note that when automatic temperature compensation is required, the cable becomes an integral part of the flow cell. (Order a separate Cable Assembly only when ordering without temperature compensation.)

Flow cells, glands and cable assemblies are reusable, over and over again. Only the simple cartridge electrode is replaced, once the retrofit conversion is made.

Product Features

Flat Surface - Self Cleaning

Cartridge style - Saves time & money

Double Junction - Resists Process Poisoning

Gel Filled - No Maintenance

Gland Mounting - Replaces most brands

PDF Spec Sheet

**In-Line pH No ATC Needed**
Electrode Part #	Price	Pipe Size	Gland Part #	Price	Cable Part #	Price
S660CD PH S660CD ORP	$128.50 $153.00	3/4"	FC66P	$17.00	S648 PH S653 ORP	$40.50+ $0.80/ft $48.00 + $0.80/ft
S661CD PH S661CD ORP	$146.50 $170.00	1"	FC67P	$30.00	S648 PH S653 ORP	$40.50 + $0.80/ft $48.00 + $0.80/ft
S662CD PH S662CD ORP	$173.00 $193.00	2"	FC68P	$52.00	S648 PH S653 ORP	$40.50 + $0.80/ft $48.00 + $0.80/ft

* Specify the "L" length in feet

* Specify the "EC" End Connection, ie..."BNC"

**In-Line pH With**
Automatic Temperature Compensation
Electrode Part # & Price	Pipe Size	Flow Cell Part # & Price (includes cable and Gland)
S660CD-$128.50	3/4"	*FC66TC-#-L-EC - $149.00 + 1.95/ft**
S661CD-$146.50	1"	*FC67TC-#-L-EC - $162.00 + 1.95/ft**
S662CD-$173.00	2"	*FC68TC-#-L-EC - $192.00 + 1.95/ft**

*Specify the Temperature Compensator required

*Specify the "L" length in feet

*EC - Specify the "EC" End Connection, ie..."BNC"