|
The Texmate sterilizer
controller has many new and unique features making it ideal for steam
sterilizer / autoclave manufacturers and refurbishers to upgrade analog
sterilizers to digital control. The controller contains all the built-in
temperature control and timer functions for steam sterilizer operations in
easy to program menus described below.
The dual alphanumeric display
with a five-button IP65 polyester faceplate, fronting a 96x48mm 1/8 DIN case,
is the ideal operator interface for easy programming and displaying sterilizer
menu messages.
Bubbler System
Level Measurement
� Easy front panel
configuration and control using instructive programming menu messages.
� Selectable "STERILIZE
ONLY" or "STERILIZE
AND DRY" cycles.
� Descriptive display messages showing temperature and time remaining during
each cycle.
� Operator adjustable drying time for drying cycle with factory programmable
minimum and maximum time limits.
� Operator selectable sterilization temperatures with factory programmable
preset temperature limits.
� Operator adjustable sterilization time window for selected sterilization
temperature. Factory programmable minimum and maximum sterilization time
limits.
� Over / under-temperature shutdown with scrolling display fault indication: "OVER
TEMPERATURE FAILURE" or "UNDER
TEMPERATURE FAILURE".
� Over-temperature
shutdown during drying cycle.
� Temperature warning scrolling display message: "WARNING
CONTENTS ARE HOT" if the door is
opened and the temperature is above the factory programmed value.
� Factory programmable independent PID control settings for both the
sterilizing and drying cycles.
� RTD or thermocouple and status inputs.
� Relay outputs for heater / vent valve control.
� Optional direct serial printer output with optional print format including:
date, job number for day, time related temperature and time for duration of
sterilize
cycle, and temperature fault indication on printout.
� Trend analysis using optional 4000 sample time stamped data logger.
� For multiple unit OEM manufacturers and refurbishers, the operating system
is reconfigurable using Texmate's Development System software.
Texmate Controllers for this
application:
DI-602AT5C�DR�PSI�....... Dual display with Steam sterilizer macro from US$
510.00
DI-60AT5C-DR-PS1-....... Single display with Setam sterilizer macro from US$
435.00
|
PATHFINDER
INSTRUMENTS
How To Order