CONDUCTIVITY ANALYSER

PATHFINDER

model MK-200

Price $379.00

The Model MK-200 is a microprocessor programmable Conductivity controller that accepts a conductivity electrode as an input. Outputs are : (1) on-off or proportional control relay ( this control can be SSR drive or mechanical contacts);(2) a second optional control relay can be added for control above and below the set point or as an alarm ( 3) a 4-20 mA recorder signal proportional to the conductivity level

The power source is from 85 to 265 VAC, 50/ 60Hz free voltage there is no need to change connections for different voltages. The controller is programmable from the front panel via 8 switches, and calibration is done using two adjustment pots.( see programming instructions in the following pages) The front panel is NEMA 4X rated and mounting hardware is provided.

MK-200 Microprocessor programmable Conductivity controller $379.00

PROBES AVAILABLE

PART# DESCRIPTION PRICE

PATHFINDER - CS-100 10 TO 100 µS $149.00

PATHFINDER - CS1000 100 TO 2000 µS $119.00

PATHFINDER - CS5000 2000 TO 10,000 µS $119.00

SPECIFICATIONS:

Input:................CS-100, CS-1000, CS-5000 electrode Range dependant

Input Range:........................0 to 10uS,through 0 to0 to 75mS

temperature compensation....0 to 50 deg C

Accuracy:.............................+/- 2% of span

Control output ......................(1) or optionally (2) 3A SPDT relays

Recorder output....................4 to 20mA isolated

Front-panel............................NEMA-4Xrated Panel cutout..........................92 X 92 mm (1/4 DIN)

FEATURES:

Isolated 4-20 mA out 1/4 DIN Panel mount,

NEMA 4X panel UL,CSA,CE approvals

Dual Display,Conductivity&Setpoint

Universal power supply 85-265,50/60Hz

Optional : Dual outputAlarm,