SIMULATORS AND CALIBRATORS

PIE 530 4-20 mA Loop Calibrator

0-24 mA Loop Calibrator with Auto Ramping

PRICE STARTING AT $ 650.00

Resources

PDF Specifications

Pie530manual.pdf

Manufacturer PIE

Quick Specs

4 to 20 mA Loop Functions

Source and Read 0.000-24.000 mA

Simulate 2-Wire Transmitters 0.000-24.000mA

Power 2-Wire Transmitters and Read 0.000-24.000 mA

Display current in mA or -25.00-125.00 % of 4-20 mA

Read 0.00 to ± 30.00 VDC with 4X over range ability

Full 5 Digit Display

True ±0.012% of reading accuracy

Bar graph for quick reference of input and output levels

High contrast graphic display viewable in all lighting conditions and angles

Easily adjust output by 0.001 mA (0.01%) or 0.100 mA (1.00%)

EZ-Check Switch with EZ-Step Button

3-position tactile switch with push button for true one-handed calibrations

Push button for stepping through calibration points

6 different step sizes

Hands-free auto step and auto ramp modes

Uses a standard 9V Alkaline Battery

Superior battery life up to 40 hours under typical continuous usage

Easy access to battery compartment

240 VAC Tolerant

Fuse-less protection from accidental misuse

Lightweight and rugged with a solid feel

Convenient Velcro® hand strap allows for a firm confident grip or attachment to pipes and ladders

User selectable 250ohm resistor in series with the output for compatibility with HART® protocol enabled devices

The Practical Instrument Electronics Model 530 is the result of 30+ years of experience manufacturing and designing calibrators for the process control industry. Almost all of the Fortune 500 manufacturers use calibrators designed by our engineers. The Model 530 calibrator incorporates all of this knowledge and experience and combines it into one superior product. It has simple, easy to use controls featuring a large high contrast display with easy visibility without the need for contrast adjustments. The Model 530 is designed to be a tool with all the practical functions required to get the job done easily without the confusing extras or reading through a complicated manual. The Model 530 can source and read current in the process loop and simulate, power and measure 2-wire transmitters. It can read voltage to 30.00 VDC with over 4X over range ability.