|
SIMULATORS
AND CALIBRATORS
|
PIE 525 TC & RTD Dual Calibrator with
Auto Stepping
Reads RTD and TC outputs and displays
temperature
PRICE STARTING AT $1,395.00
Resources
|
Manufacturer PIE
Quick
Specs
Direct Temperature Input/Output
Read or Source in °C or °F for your T/C type and RTD curves
8 Standard T/C Types Available
Types J, K, E, T, R, S, B, N and mV
Cold Junction Compensated
8 RTD Curves Available
Platinum, Copper, Nickel & ohms
Custom types and ranges are available
Auto Stepping
Accurate to ±0.2°C (±0.4°F) with 0.1° Resolution
Millivolt accuracy of ±(0.008% + 0.006 mV)
Resistance accuracy of ±(0.015% + 0.05) ohms
Guaranteed to Work with ALL Pulsed Instruments
Works with wide variety of transmitters including popular
Rosemount and Honeywell Models
Compatible with devices using pulsed excitation currents
including PLCs, DCS Recorders and all others
IN RTD mode Automatic Detection of 2, 3, or 4 wire Connections
No buttons or switches required, 2W, 3W, or 4W indicator is
automatic
A valuable troubleshooting tool
Easily adjust output by 0.1°
Pressing down and turning EZ-Dial Knob
will select a faster dialing speed
User selectable EZ-Check for 0% and 100% span adjustment
Store new EZ-Check values by pressing the EZ-Dial knob
Recall stored minimum and maximum readings
Uses a standard 9V Alkaline Battery
Superior battery life of 45 hours under typical continuous usage
Easy access to battery compartment
Lightweight and Rugged with a Solid Feel
Small, tough and protected to 60V |
|
The Practical Instrument
Electronics Model 525 T/C & RTD calibrator provides direct
temperature calibration to all types of instruments such as
transmitters, recorders, controllers, alarms, data acquisition, and
computer systems. Also, he Model 525 reads RTD & T/C outputs and
displays temperature. It is compatible with pulsed systems and
transmitters (like the Rosemount 3144) 2, 3, or 4 wire connections
are detected automatically. The Model 525 is a superior replacement
for decade boxes, and eliminates the need for lugging around large
equipment and the possibility of misreading RTD tables.
Use
the EZ-Check Switch to quickly switch between three stored
temperatures, 3/mV outputs. It’s easy to customize these values to
your application. In read mode, the EZ-Check Switch recalls minimum
and maximum readings. Store/Clear memory with a press of the EZ-Dial
Knob.
The Practical Instrument Electronics Model 525 offers
the highest performance and functions in its class by exceeding the
accuracy and functions of many higher priced T/C & RTD
calibrators. It is a low cost solution for checkout and calibration
of all T/C & RTD instruments in the field, shop or control room.
Contact Practical Instruments Electronics for custom T/C & RTD
curves, ranges, or special requirements not provided by the Model
525.
|
|
PATHFINDER
INSTRUMENTS
Order or Shop On Line