|
Pathfinder Model
CT-1000
$214.00 |
The Model
CT-1000 (encapsulated miniature transmitter) is a 2-wire, 4-20 mA
conductivity transmitter featuring encapsulated construction, high
performance and small size.
The unit uses an in-line/submersion conductivity cell
Model CS-100,CS-1000, CS3000 (range dependant), (K=0.1, K=1.0, K=10.0)It transforms the cell
signal to a 4 to 20mA current proportional to the conductivity level. This
output may be transmitted over two wires to a control location, the same 2
wires provide power to the transmitter. Any D.C. power supply from 12 to 36V
may be used. There are two adjustments on the transmitter to standardize
probes for "SPAN" and "ZERO". The output can be monitored with a loop
powered meter, a loop resistor or a multimeter during the standardization
procedure.
Data sheet
Manuel
|
|
SPECIFICATIONS
Available ranges: 0-10
uS to 75000
uS
Output: 4-20mA
Power Supply: 12 to 36VDC Load Resistor: 0 to 750W at 24VDC
Linearity: ±.2% of span
Temperature Compensation: 0-50˚C
range...............................................0 to 50ºC
Operating Temperature
Range: -25 to +70ºC Reverse Polarity
Protection: Internal diode
Dimensions: 1.5" × 2.0" × 1. |
How to
Order