PATHFINDER  INSTRUMENTS

 THE HOME OF WATER QUALITY INSTRUMENTATION

         Pathfinder Instruments Specializes in Controllers, Recorders, Meters, Transmitters and much more ..

Home About Us Products Tech Support    Order or Shop On Line Other Website Links 

HAVE A QUESTION - CALL: 800 284 9698  OR 760 438 0890

PRESSURE PUMPS

Magnum Pro Pressure and Vacuum Calibration Pump
Rugged, compact pump with pressure to 150 psi and vacuum to 28"Hg

Magnum Pro Pressure and Vacuum Calibration Pump

PRICE STARTING AT $350.00

The Magnum Pro Calibration Pump is the most reliable, rugged pump for calibrations up to 150 psi. It uses a “Schrader” valve which totally eliminates failure caused by the vent valve failing. These pumps are leak free due to double O-rings and no-needle valves, and virtually never need rebuilding. The Delrin housing eliminates heat transfer so the readings don’t appear to drift.

The unique hose and fittings are push-on, and a swivel keeps the hose from tangling. If the hose is damaged simply cut off the end and reinsert it into the fitting. An optional hose kit is available so that a tee is not necessary when connecting a sensor and calibrator. A special non-dispersing lubricant makes the first stroke as easy as the others, and eliminates wear caused by the grease migrating to the ends of the stroke. Construction is so strong that the Magnum pumps can be repeatedly dropped on a concrete floor without damage.

Each unit includes a pump and one hose assembly with a 1/4" NPT female end. The Magnum Pro Pressure Calibration Kit includes the Magnum Pro calibration pump, an easy-to-read analog gauge with 1% accuracy, case, and hose to connect to item being tested. The MP-PK and the MP-VK kits are easy to use and handy for field work.
Product Details

Manufacture: East Hills Instruments

Quick Specs
  • No-needle valves, “MASH-Proof” vent valve
  • Unique, easy-to-use hose and fittings. No snake to fight
  • Rugged Delrin and anodized aluminum construction
  • Dual O-rings on all pistons insure zero leakage, a solid feel, and very smooth operation
  • Compact (9"x 1-1/2") and lightweight
  • Maximum pressure on MP-P is 150 psi
  • Maximum vacuum on MP-V is 28"Hg
  • Oversized check valves for smooth controlled operation
  • Extra-large vernier adjustment range
  • Pressure venting can be done in increments of 0.1" H2O
  • Two year warranty


Resources
Magnum Pro Pressure Pump spec sheet PDF

Magnum Pro Pressure and Vacuum Calibration PumpView Magnum Pro Kits

Magnum Pro Pressure and Vacuum Calibration PumpView Magnum Pro Accessories

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

©2008 Pathfinder Instruments - All Rights Reserved.

 2075Corte Del Nogal, SuiteX, Carlsbad, Ca 92011

Ph: 760-438-0890 / Fax: 760-438-3953