PH / ORP DO CONTROLLERS

JENCO PH & ORP ANALYZERS

6309POT

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.

Download Spec Sheet

JENCO-6309POT

Dual Parameter Analyzer, Graphic display, 5 - relays

$719.00

ELECTRODE / ACCESSORY OPTIONS AVAILABLE
PART #	DESCRIPTION	PRICE
JENCO 1922757-020HTV18	A Flat Tip Industrial in-line pH/Reference double junction electrode with 10K Thermistor ATC and Spade Lug for pH (+) and Stripped and Tinned Leads for all other connections. Includes a 20 foot long cable. Range 0 pH to 12 pH	$179.00
JENCO 1923737-020HTV18	A Spherical Bulb with protective guard industrial in-line pH/Reference double junction electrode with 10K Thermistor ATC and Spade Lug for pH (+) and Stripped and Tinned Leads for other connections. Includes a 20 foot cable. Range o pH to 12 pH	$179.00
JENCO-600B-Y	An adapter to use a BNC connection- 4mm Spade Lug for pH(+)	$ 48.00
SENSOREX-S650CD -SUBMERSION OR S660CD - INLINE	pH ELECTRODE - Cartridge Style, Flat Surface, self cleaning	$121.00
SENSOREX-S653/10	10 Foot Cable Assembly Standard Use, without ATC.	$ 49.00
ORP ELECTRODES
JENCO 1929857-020T	A flat Tip Industrial in-line ORP/Reference double junction electrode with all Stripped and Tined Leads for all connections. Includes a 20 foot cable.	$147.00
JENCO 1929837-020T	A Spherical Bulb with protective guard industrial in-line ORP/Reference double junction electrode with all Stripped and Tinned Leads for all other connections. Includes a 20 foot cable.	$153.00
SENSOREX-S650CD-ORP-SUBMERSION OR S660CD/ORP- INLINE	ORP ELECTRODE - Cartridge Style, Flat Surface, self cleaning	$144.00
SENSOREX-S653/10	CAP AND 10 FOOT Cable Assembly Standard Use	$ 45.00

Features

pH/Orp/Temp. Measurement & Control

Display pH Electrode Efficiency

Reversible & Isolated 4~20mA Output

RS-485 Output

Bumpless Calibration

Graphic LCD Dispaly,128 X 64With Backlight

Membrane Switch With Audio Feedback

Auto Temp. Compensation

High 50/60 Hz Noise Rejection

Pipe/Wall/Panel Mounting

1/4 DIN Watertight Enclosure

One Programmable Relay For Temp.

CE Approved

Programmable Linear/ Orp Current Output Or Programmable Linear/ Anti-Logarithmic Current Output

Specifications

Primary Specs
	Range	Resolution	Accuracy
pH	-2.00 to 16.00	0.01pH	0.1% ± 1 LSD
ORP(Absolute)	-2500~2500mV	1mV	±0.1% rdg ± 1mV
ORP(Relative)	-6499~6499mV	1mV	±0.1% rdg ± 1mV
Temp.	-10.0 to 120 °C	0.1°C	± 0.3°C


pH
	Temperature Compensation Range	-10.0 to 120.0 °C
	Buffer Recognition	4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
	Buffer Temperature Range	0 to 60.0 °C
	Electrode Slope Compensation	±30% of Ideal Slope
	Electrode Offset Compensation	±100 mV
	Input Impedance	Greater than 10 exp(13) Ohms
	Calibration Auto End Point Sensing	Yes

Output Relays
	pH	2 programmable high or 2 low
	ORP	2 programmable high or 2 low
	Temperature	1 programmable high or 1 low
	Control Type	On/Off
	Relay Output (Resistive Load Only)	5 Amps at 115 VAC 2.5 Amps at 230 VAC
	Relay Set Point Hysteresis	User Programmable

Current Output
	Type	Isolated 4 to 20 mA
	Range	Selectable Zero, & Span
	Accuracy	±0.02mA
	Isolated Voltage	500 VDC
	Maximum Load	500 W

General
	ATC Sensor	Thermistor 10KiloOhms at 25 C
	Security Protection	4 digit password
	Keypad	Audio feedbackup
	Communication	RS-485
	Pre-Amplifier Voltage	±5 VDC,20mA Max Output
	Power source	115/230 VAC ,50/60Hz
	Dimensions	1/4 DIN ,Depth 148mm
	Weight	950 gm