PH / ORP / DO CONTROLLERS

JENCO ANALYZER DO / TEMPERATURE

6308DT

D.O. analyzer, 1/4 DIN panel mount IP-65 waterproof case, polarographic sensor with replaceable membranes and programmable pressure and salinity compensation. Features 4 fully programmable D.O. relays and 1 for temperature. Has an RS-485 interface and is password protected. Analog 4-20 mA output is fully programmable and reversible. Graphical display. Connections are tinned leads. CE Approved.

View Detail Information:

Download Spec Sheet

JENCO 6308DT

Advance Single Parameter Analyzer-dissolved Oxygen, Temperature

$569.00

ELECTRODE / ACCESSORY OPTIONS AVAILABLE
PART#	DESCRIPTION	PRICE
JENCO ID-900-5DO/10	Industrial Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front and rear and a 10 foot long cable	$295.00
JENCO ID-900-5-D0/30	Industrial Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front and rear and a 30 foot long cable	$335.00
JENCO LD-900-6-DO/10	Field Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads only on the front with a waterproof 10 foot long submersible cable.	$295.00
JENCO LD-900-6-O-DO/30	Field Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads only on the front with a waterproof 10 foot long submersible cable.	$335.00
JENCO LD-900-3-DO	MEMBRANE KIT: Includes 6 membrane caps, KCL Powder, KC1 Bottle and sandpaper for cleaning Gold Cathode and Silver anode after soaking then in Ammonia Hydroxide solution for 2-3 minutes. (Essential kit as electrodes do not have membranes)	$ 48.00

FEATURES

	Bright, Graphical LCD Display, 1.5 X 2.25
	Simultaneous Measurement And Analysis
	1/4 DIN Watertight, IP65 Rated Enclosure
	Reversible & Isolated 4 To 20mA Output With Adjustable Bandwidth
	Continuous Controller / Relays Operation During Calibration
	4-Digit Password Security Protection
	Programmable Set Point Hysteresis
	Automatic Temperature Compensation
	CE Approved
	Built In ISO9001 Certified Facility
	Membrane Keypad With Audio Feedback
	Power Down, Non-Volatile Memory Backup

SPECIFICATIONS

Primary Specs
		Range	Resolution	Accuracy
	Dissolved Oxygen (ppm)	0.0 to 60.00 ppm	0.01 ppm	± 0.2% of span

	Dissolved Oxygen (% )	0 to 500.0%	0.1 %	± 0.2% of span

	Temp.	-10.0 to 120 °C	0.1 °C	±0.1°C ±1 LSD

DO
	Salinity compensation	0.0 to 40.0 ppt
	Pressure compensation	600 to 1100 mBar
	Polarographic sensor	Yes
	Replaceable membranes	Yes
Output Relays
	Control Type	On/Off
	Relay Output (Resistive Load Only)	5 Amps at 115 VAC 2.5 Amps at 230 VAC
	Relay Set Point Hysteresis	User Programmable
Current Output
	Type	Isolated 4 to 20 mA
	Range	Selectable Zero, & Span
	Accuracy	±0.02mA
	Isolated Voltage	1000 VAC
	Maximum Load	500 W

General
	ATC Sensor	Thermistor 10KiloOhms at 25 °C
	Security Protection	4 digit password
	Keypad	Audio feedbackup
	Communication	RS-485
	Pre-Amplifier Voltage	±5 VDC,20mA Max Output
	Power source	115/230 VAC ,50/60Hz
	Dimensions	1/4 DIN ,Depth 155mm
	Weight	950 gm

Accessories

IPD10KG-34FR-TT20
012-150-00
Enclosures

Kits

6308DTKA

6308DT with IPD10KG-34FR-TT20 probe