pathfinder instruments
HOME About Us Products Tech Support    How to Order Other Website Links 

Have a Question Call: 800 284 9698 / 760 631 1141

 

Isotech 999 Medusa R

Blackbody, Fixed-Point Primary Source Infrared Calibrator: 30 to 550°C


Isotech 999 Medusa R

$8,200.00

CLICK HERE TO BUY OR CREATE A QUOTE ON LINE

 

Isotech Medusa R Blackbody Primary Source Infrared Calibrators
The Medusa R is a blackbody primary source in which radiation pyrometers can be calibrated. Specifically designed to accommodate black body fixed point cells, the Medusa-R is the optimal choice for primary labs needing the highest levels of radiation measurement.

The temperature of the cavity can be set to ±0.1°C over the temperature range 30 to 550°C. The controller reaches 550°C approximately 45 minutes from switch on. Also, the cavity temperature, as measured by a radiation thermometer took approximately 45 minutes to reach stability from switch on.

The variation seen on the controller’s temperature indication over a 5 minute period was ±0.2°C. Similar variations were detected by a radiation thermometer looking into the cavity.

Using a portable radiation thermometer having a target diameter of 13mm, the 48mm target was surveyed. Maximum temperature differences of ±1°C were found for set temperatures in the range 100 to 500°C.

Temperatures along the inner 200mm of the 285mm long cavity were measured at 400°C and 500°C, using a hand held fiber-optic radiation probe. Maximum temperature differences of ±4°C were found.

Large Fixed Point Cells can be fitted to the Medusa R giving small uncertainties suitable for Primary Standards.


Product Details
Manufacturer: Isotech

Quick Specs
  • Will Freeze and Melt, Blackbody Fixed-Point Cells
  • Can Be Used for Comparison Calibration
  • Accuracy to ±0.05°C

 
Resources
PDF Isotech Medusa R Spec Sheet PDF (56 KB)
   
 
 
 
 
 
 
 
 
 

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

©2011 Pathfinder Instruments - All Rights Reserved.

4747 Oceanside Blvd Suite K

Oceanside, Ca 92056

Ph: 760-631-1141 / Fax: 760-631-1146