|
G
Series Precision Meters
|
 |
Accuracy: ± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability: ± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity: ± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1) |
|
|
|
Accuracy: ± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability: ± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity: ± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
|
|
|
|
|
|
 |
Accuracy: ± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity: ± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
|
|
|
|
Accuracy: ± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity: ± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1) |
|
 |
Accuracy:± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity:± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1) |
|
|
|
Accuracy:± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity:± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
|
|
 |
Accuracy:± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity:± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
This meter meets the strict 3-A Sanitary
Standards using the new “Third Party
Verification (TPV) program. Our methods of
design, construction and traceability of
components have been reviewed and
approved.
The internals of this meter are
machined or polished to meet 3-A self-draining
and cleaning requirements. The GSCPS Meter meets
Clean in Place (CIP), Steam in Place
... |
|
|
|
Accuracy:± 0.5% of the true
flow at any point within the linear range of the
turbine.
Repeatability:± 0.1% of the
indicated flow throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1,
ISA-S37.1)
Linearity:± 0.5% of the
mean K-Factor throughout the linear range.
(Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Use this meter in pre-process applications
where high accuracy is required without 3-A
Approval. |
|
|
How to
Order 
