BetaGauge II Pressure
Calibrators
Pressure Calibrator with Dual-Channel
Operation & 23 Field Changeable Ranges
|
PRICE STARTING AT $1,560.00 |
 |
For the
majority of its available range, the BetaGauge II has a typical
pressure accuracy of 0.025% full-scale and an electrical
accuracy of ±0.01%, making it four times more precise than the
instruments it is used to calibrate. A complete pressure
calibrator, engineered to perform in any industrial environment,
the BetaGauge II is equipped with everything needed to maintain
pressure instruments to manufacturer’s specifications.
In
addition to PSIG, PSIA and PSID, readouts are keypad-selectable
in any of the following engineering units for pressure: Kp/cm2;
Atmos; mBar; Bar, Kpa; mmHg; InHg; InH2O 4°C, 20°C,
60°F, cmWc 4°C, 20°C, 60°F; plus one user-defined unit. Other
valuable BetaGauge II features include minimum/maximum
measurement memory, automatically retaining the lowest and
highest values in any procedure, and % error display, which
allows difficult pressure calibration to be done without the
need to maintain exact or steady test pressures.
Dual-Channel Operation and 23 Field-Changeable Ranges Redefine
Calibrator Versatility
With pressure devices of
varying types and ranges scattered throughout a typical process
plant, dedicated calibrators can get very costly, very quickly.
BetaGauge II addresses this problem simply and sensibly. It is
both a two-channel and multi-range device. Changing ranges is as
easy as plugging in new input modules, which can be done even
while the unit is powered up. BetaGauge II automatically
recognizes the signals and assigns them to the proper channel.
That versatility makes it the ideal answer for pressure
calibration, even in critical applications like gas pipelines
and other smart transmitter-equipped sites.
There are 23
standard BetaGauge II pressure ranges available in fully
interchangeable input modules:
- 12 gauge
ranges (from 0 to 5 psig up to 0 to 5000 psig)
- Two vacuum
ranges (from 0 to -5 psig up to 0 to -15 psig)
- Four
absolute ranges (from 0 to 15 psia up to 0 to 100 psia)
- Two
compound ranges (from -15 to 15 psig up to -15 to 30 psig)
- Three
differential ranges (from 0 to 5 psid up to 0 to 50 psid)
The
standard dc module provides five electrical ranges:
- Three
voltage ranges (from 0 to ±249.99 mV DC up to 0 to ±24.999
VDC)
- Two
current ranges (0 to ±24.999 mA DC and 0 to ±149.99 mA)
This
plug-in design simplifies maintenance, too. The base unit needs
no recalibration; only the input modules do. That means you
never have to be out of service — you send only the
out-of-calibration modules back to the shop, while still using
BetaGauge II in the field.
Standard Accessories Include:
- A
multifunction, English-language, two-channel pressure
calibrator
- A standard
voltage/current input module
- An
external battery pack (NiCad, rechargeable)
- One set of
test leads
- A standard
trickle charger
- An
instruction manual
- A vinyl
carrying case
- A 9-pin D
shell to 9-pin D shell serial cable
| |
|
Quick
Specs
- Accuracy 0.025%
- Many ranges available in fully interchangeable input modules
- Minimum/maximum measurement memory
- Automatically retains low and high values
- Exact or steady test pressures not necessary with % error
display
Resources:
 BetaGauge
II Pressure Calibrator spec sheet PDF
 ►View
Beta Gauge II Parts
►View
Beta Gauge II Accessories |
PATHFINDER
INSTRUMENTS
Order or Shop On Line